Body hatch tube and gas chamber tube Material:Acrylic
Pipe clamps,elbows and connecting parts Material:PPC
Body hatch tube and gas chamber tube Color:Transparent
Pipe clamps,elbows and connecting parts Color:White
Oxygen tube size:Inner diameter of 4mm/0.16″
The length of the tube is 80cm.
The bottom of the main hatch tube contains sieve and biochemical cotton, effectively prevent impurities from flowing into the tube, so that the water flow through the comfort, thereby increasing the hatching rate.
The main hatching tube using acrylic transparent material, good light transmission, easy to observe the hatching process of fish eggs.
The product is equipped with oxygen regulating valve, if the oxygen pump without regulation function, you can use the oxygen regulating valve to regulate the gas inside the tube.
When used, the oxygen pump is connected with the fish egg incubator, and a check valve is required to prevent the water from flowing into the oxygen pump.
1 x Body hatching tube
1 x Gas chamber tube
1 x Air stone
1 x Oxygen tube
1 x Airhead
1 x Body hatch tube and gas chamber tube connection components
1 x Biochemical cotton
1 x Oxygen regulating valve
2 x Pipe clamp
4 x Suckers
1. The oxygen tube passes through the small hole
2. Connect the bubble stone
3. Install transparent acrylic tube (thin)
4. Connect to the main hatching room
5. Install black biochemical cotton
6 Install two fixed valves
7. The other end of the blue control valve is connected to the air pump.
ATTENTION: It is advisable that the water level line is flush with the small hole in the elbow
1.Please allow a little size error due to hand measure.
Fish eggs incubator: Made of non-toxic plastic and other material, for raising hatching fish eggs.Quality assurance, environmental protection and safety.
Easy to install: Suction tube clamp is soft and easy to install, but still not easy to scratch the incubator director. Mesh uniform and dense to ensure smooth flow of water and improve hatch ability.
Fish incubator: Air-lift joints with a 45 degree camber make the water flows more smoothly, which can be driven by a small air pump. The bracket is transparent tube for easy observation.
Incubation purpose: Allow fresh water to circulate over cichlid eggs that have been separated from the parents, a fresh supply of clean water allows the eggs to develop in an oxygen rich environment.
Sweet tips: Hatching fish eggs, you need to use the same fish tank water, so that fish eggs adapt to the environment.
Specification: WEAVERBIRD Fish Hatchery Incubator, Aquarium Cichlids Fish Egg Incubator Tumbler Fish Hatchery Breeding for Fish Tank
Amazon.com Price: $12.99 (as of 04/05/2021 16:30 PST- Details) Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on [relevant Amazon Site(s), as applicable] at the time of purchase will apply to the purchase of this product.
Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on [relevant Amazon Site(s), as applicable] at the time of purchase will apply to the purchase of this product.